Horizon 100w OCF40LP 40m/20m/10m Off Centre Fed Dipole HF Multi Band Antenna
ANTENNA DESCRIPTION
The OCF40LP is an Off Center Fed wire antenna designed to permit operationon the 40m, 20m and 10m amateur DX bands. The antenna is ideal for local communications within 1000-2000 km of your location or for DX depending on how high the antenna is mounted and in what configuration. If you're new to the HF bands and want to try a bit of local rag chewing, why not experiment with this antenna first.Alternatively, when the antenna is mounted at height, and well in the clear, this antenna will permit DX contacts to be made on the 40m and especially the 20m band.For the size, weight and cost, we simply do not think there is a better performing antenna when the user is limited to a single or wire type antenna. Multi-band, high performance with utmost simplicity and ease of use. You will not be disappointed.
SPECIFICATIONS
The OCF40LP Off Centre Fed wire dipole features include:
Operating bands 10, 20 & 40m (Use on 80/30/17/12/6m with a tuner - 15m not recommended,)
Bandwidth 10m - 2500kHz, 20m - 800kHz, 40m - 600kHz typical, (VSWR < 2.0:1)
Max Operating power 100W PEP, 50W Digital continuous
Typical impedance 40 ohm - 60 ohm (depending on installation height and configuration)
Gain 0.0 to 6 dBd
Effective Gain 12 dBi Typical (when mounted at 1 wavelength height)
VSWR 1.5:1 (typical)
Total length Dipole 20.8m.
ANTENNA DESIGN AND COMPONENTS
The OCF40LP is one of the most simple yet effective multi-frequency antennas. Light weight but strong multi-stranded G304 stainless steel wire is used for longevity. The antenna does not use any traps. The balun also provides the necessary 4:1 impedance ratio transformation to permit low VSWR over the frequency bands of operation. The balun is supplied with this antenna.
ANTENNA DESCRIPTION
The OCF40LP is an Off Center Fed wire antenna designed to permit operationon the 40m, 20m and 10m amateur DX bands. The antenna is ideal for local communications within 1000-2000 km of your location or for DX depending on how high the antenna is mounted and in what configuration. If you're new to the HF bands and want to try a bit of local rag chewing, why not experiment with this antenna first.Alternatively, when the antenna is mounted at height, and well in the clear, this antenna will permit DX contacts to be made on the 40m and especially the 20m band.For the size, weight and cost, we simply do not think there is a better performing antenna when the user is limited to a single or wire type antenna. Multi-band, high performance with utmost simplicity and ease of use. You will not be disappointed.
SPECIFICATIONS
The OCF40LP Off Centre Fed wire dipole features include:
Operating bands 10, 20 & 40m (Use on 80/30/17/12/6m with a tuner - 15m not recommended,)
Bandwidth 10m - 2500kHz, 20m - 800kHz, 40m - 600kHz typical, (VSWR < 2.0:1)
Max Operating power 100W PEP, 50W Digital continuous
Typical impedance 40 ohm - 60 ohm (depending on installation height and configuration)
Gain 0.0 to 6 dBd
Effective Gain 12 dBi Typical (when mounted at 1 wavelength height)
VSWR 1.5:1 (typical)
Total length Dipole 20.8m.
ANTENNA DESIGN AND COMPONENTS
The OCF40LP is one of the most simple yet effective multi-frequency antennas. Light weight but strong multi-stranded G304 stainless steel wire is used for longevity. The antenna does not use any traps. The balun also provides the necessary 4:1 impedance ratio transformation to permit low VSWR over the frequency bands of operation. The balun is supplied with this antenna.
ANTENNA DESCRIPTION
The OCF40LP is an Off Center Fed wire antenna designed to permit operationon the 40m, 20m and 10m amateur DX bands. The antenna is ideal for local communications within 1000-2000 km of your location or for DX depending on how high the antenna is mounted and in what configuration. If you're new to the HF bands and want to try a bit of local rag chewing, why not experiment with this antenna first.Alternatively, when the antenna is mounted at height, and well in the clear, this antenna will permit DX contacts to be made on the 40m and especially the 20m band.For the size, weight and cost, we simply do not think there is a better performing antenna when the user is limited to a single or wire type antenna. Multi-band, high performance with utmost simplicity and ease of use. You will not be disappointed.
SPECIFICATIONS
The OCF40LP Off Centre Fed wire dipole features include:
Operating bands 10, 20 & 40m (Use on 80/30/17/12/6m with a tuner - 15m not recommended,)
Bandwidth 10m - 2500kHz, 20m - 800kHz, 40m - 600kHz typical, (VSWR < 2.0:1)
Max Operating power 100W PEP, 50W Digital continuous
Typical impedance 40 ohm - 60 ohm (depending on installation height and configuration)
Gain 0.0 to 6 dBd
Effective Gain 12 dBi Typical (when mounted at 1 wavelength height)
VSWR 1.5:1 (typical)
Total length Dipole 20.8m.
ANTENNA DESIGN AND COMPONENTS
The OCF40LP is one of the most simple yet effective multi-frequency antennas. Light weight but strong multi-stranded G304 stainless steel wire is used for longevity. The antenna does not use any traps. The balun also provides the necessary 4:1 impedance ratio transformation to permit low VSWR over the frequency bands of operation. The balun is supplied with this antenna.